Isovists compactness and stairs as predictors of evacuation route choice.

The building design is a crucial factor that can be actively adjusted and optimized to prevent human and property threats in emergency scenarios. Previous research suggests that specific building layouts may significantly influence human behaviour during evacuation. However, detailed empirical data about human behaviour in various types of buildings with different layouts are still missing and only marginal recommendations from this field are reflected in actual construction practice. In this study, desktop VR technologies were employed to study human decision-making in problematic T-intersections in the context of an emergency evacuation. More specifically, we studied fundamental attributes of buildings such as the width and length of the corridors and the presence of stairs to explore how they influence the choice of the evacuation route. The space-syntax isovist method was used to describe spatial parameters of corridors, which makes the results applicable to all buildings. Behavioural data from 208 respondents were analysed using multilevel regression models. Our results support previous claims concerning the importance of specific spatial layouts of evacuation corridors because respondents systematically chose wider and shorter corridors with visible staircases as the preferred evacuation route. The present findings further promote the ongoing discussion on the design of marked evacuation routes and building design that takes human factors into consideration.

Identification and Analysis of Key Barriers of BIM Application for Small- and Medium-Sized Fire Protection Enterprises.

The application of Building Information Modeling (BIM) in fire protection discipline has been sufficiently proved to be useful, but has encountered many barriers in China. Among which, small- and medium-sized enterprises (SMEs), which are considered sensitive to adoption costs and external funding support, play a critical role in the BIM adoption process in fire protection discipline. Therefore, identifying and analyzing the barriers of BIM application are essential to help small- and medium-sized fire protection enterprises to overcome these barriers. In this study, semantic analysis, which includes word frequency analysis and coword analysis, based on literature review was utilized to identify the main barriers. 20 main barriers, which were classified into software, people, organization, and environment group, were obtained. Then, Interpretive Structural Modelling (ISM) approach and Cross-Impact Matrix Multiplication Applied to Classification (MICMAC) analysis were utilized to hierarchically analyze and categorize the main barriers of BIM application in Chinese SMFEs. The findings revealed that the lack of external support and the lack of BIM laws and regulations applicable to fire protection discipline are the key barriers in general for the application of BIM in SMFEs. For the barriers at the enterprise level, through further analysis and discussion based on barriers in the people and organization clusters, the lack of funding support for proper BIM training and the lack of organization culture support were concluded as the key barriers of BIM application inside the scope of SMFEs. According to 80-20 principle, more effort should be focused on the key barriers to gain maximum management effect. The research result categorizes the barriers for easy intervention of fire protection enterprises' managers and policymakers. It contributes to the nascent studies of BIM application and provides guidance for the application of BIM in fire protection discipline.

Universal Design in Primary Schools.

The Norwegian building code give an apparently clear framework for the implementation of universal design (UD) in public buildings. However, it seems that neither increased awareness of UD, nor compliance with building regulations can so far guarantee equal use. Statistics and inspections reveal that there still are shortcomings as regards accessibility for many groups. Children with reduced mobility or impaired vision are better cared for than students whose needs are less documented. There is still a necessity for understanding the needs of other groups, such as children with hearing impairments, or other sensory challenges, children with social anxieties and those within the autism spectrum. A key part of achieving UD should be a design process where users' needs are in focus. Based on recent research carried out by SINTEF Building and Infrastructure and funded by the Directorate for Children, Youth and Families, this paper presents 1) Examples of practices where primary and lower secondary schools have been designed within a framework of UD, and 2) Important drivers for universal design during the design process. Recommendations will be proposed for further development of standardized tools. Findings indicate that opportunities to challenge the minimum requirements for UD within a conventional design process are few without having a supportive and competent client. The regulations and standards do not necessarily ensure inclusion and equal use. Low understanding about what UD entails in terms of user knowledge and involvement may be one reason. Norwegian standards for UD do not appear to be in significant use. Tools for UD often appear as checklists, based on the building regulations. The examples show that effective collaboration between the client and the architect plays a central role in the UD of schools. Architects not only need tools to think about usability at all design levels, but the ability to collaborate with the client and users in every phase.

From building regulations and local health rules to the new local building codes: a national survey in Italy on the prescriptive and performance requirements for a new performance approach.

BACKGROUND: World Health Organization has highlighted the need to strengthen the relationship between health and built environment factors, such as inappropriate housing conditions. Building Regulations and Local Health Rules provide safety and building hygiene in construction practices. Currently the Italian Government is giving rise to a Building Regulation Type and the paper aims to verify the present contents of recent innovative Local Health Rules and Building Regulations of several Italian municipalities for supporting the performance approach of the future Building Regulations including hygienic issues. METHODS: The analysis examines both Building Regulations and Local Health Rules of a sample of about 550 cities, analysing some specific fields of interest: urban field, outdoor issues, housing features, housing restrictions, and qualitative aspects. RESULTS: The analysis focuses on some specific aspects defining the general data reported in Building Regulations and Local Health Rules, in particular around surfaces, heights, lighting and aeration ratio, basements and semi-basements, gas radon, building greenery, etc. CONCLUSION: The investigation permitted to have a wide vision on the present State of the Art in order to highlight some innovative aspects and design approaches of Building Regulations and Local Health Rules. New perspectives in the new regulations should have a performance approach, starting also from the recent SARS-CoV-2 pandemic.

Hygienic and sanitary standards of housing in Europe: a comparative analysis of nine countries.

In recent years, growing interest was devoted to housing conditions from both scientific community and public health, so they are now considered among the main environmental and social health determinants of health of the population. Aim of the study is to analyze and compare the current regulations regarding housing sanitary requirements in different Countries of the EU (Sweden, United Kingdom, Denmark, the Netherlands, France, Germany, Portugal, Spain) with the contents of the Italian Health Ministerial Decree 5th July 1975. From the websites of the official channels of the various countries the regulations have been downloaded. For the comparison, only the aspects of BCs concerning the scale of the building were examined; the comparison concerned all the requirements of the Health Ministerial Decree of 5.07.1975 and some other parameters (e.g. indoor chemical pollution, ionizing radiation, non-ionizing radiation) not provided for in the Ministerial Decree, treated in the other standards regulations, and relevant for the indoor well-being of the occupants. The authors observe a wide variability in the contents and in the formulation of the hygienic-sanitary requirements among the different Building Codes, above all as regards the dimensional data and some fundamental themes (e.g. heating systems, mechanical ventilation) whose treatment is often not it is updated with respect to the technological-scientific innovation consolidated over the past few years. A diverse approach among European Countries is also observed: from a market-oriented logic (e.g. UK), to a prescriptive one (Italy), to a functionality-oriented (the Netherlands). The comparative analysis we carried out made it possible to identify convergences and divergences in the standards analysed for the different European countries. As far as the Italian legislation on the usability of residential premises, finally, considering the health, social, environmental and economic trends, many standards contained in the MD 5th July 1975 should be reviewed and updated.

Towards an update of the Italian Ministerial Decree July 5th, 1975.

In recent years, the Scientific Community and the Public Health world, in general, have devoted increasing interest to housing conditions, which are considered, to date, one of the main environmental and social determinants of the population's health. In particular, the Scientific Community has identified and studied various indoor well-being factors (e.g. lighting, temperature, ventilation, air quality, etc.). Some of these factors have been regulated by laws and regulations at various levels: the availability of clear and updated health requirements dictated by the regulations is fundamental to effectively protect public health, especially in confined environments. In the present work, we propose a revision of the Italian Ministerial Decree of July 5th, 1975 titled Modificazioni alle istruzioni ministeriali 20 giugno 1896 relativamente all'altezza minima ed ai requisiti igienico sanitari principali dei locali d'abitazione (Modifications to the ministerial instructions of June 20th, 1896 regarding the minimum height and the main hygienic-sanitary requirements of living spaces) in order to update the definition of the essential elements that qualify a space as habitable from the hygienic-sanitary point of view, taking into account the evidence gathered from the technical and scientific literature on the requirements and contents of the Building Codes of the major European countries.

A proposal of hygienic and sanitary standards for the new Building Code in Italy.

The traditional emphasis of Public Health on the type and quality of housing today merges with other wider determinants of health such as: the neighbourhood, the community and the "place" where a home is located, but also the policies that make access to a healthy home within everyone's reach. At the neighbourhood scale, context-related aspects heavily influence the internal quality and real usability of the buildings themselves, with particular reference to factors such as the quality of the site, the relationship between the building and the context, the presence and quality of the greenery and open spaces surrounding the building, as well as all measures that make it possible to reduce the building's impact on the environment, to protect it against environmental pollution, and to manage the building in an integrated manner for maintenance purposes. Creating healthy living environments means referring to the different dimensions mentioned above, and this not only requires the attention of Public Health operators, but also implies an integration of vision and objectives among various professional skills and competences that puts health at the center of all policies. This proposal, which starts from the analysis of existing local hygiene regulations and scientific literature, aims to take stock of a number of areas considered fundamental for the assessment of building hygiene aspects, with particular reference to the eco-sustainability of buildings and adaptation to climate change. The aspects identified can be considered as a starting point for the preparation of integrated building and hygiene regulations based on documented effective practices for the protection of Public Health.

Comparative assessment of impact analysis methods applied to large commercial aircraft crash on reinforced concrete containment.

The precise evaluation of the potential damage caused by large commercial aircraft crash into civil structures, especially nuclear power plants (NPPs), has become essential design consideration. In this study, impact of Boeing 767 against rigid wall and outer containment building (reinforced concrete) of an NPP are simulated in ANSYS/LS-DYNA by using both force time history and missile target interaction methods with impact velocities ranging from 100 m/s to 150 m/s. The results show that impact loads, displacements, stresses for concrete and steel reinforcement, and damaged elements are higher in case of force time history method than missile target interaction method, making the former relatively conservative. It is observed that no perforation or scabbing takes place in case of 100 m/s impact speed, thus preventing any potential leakage. With full mass of Boeing 767 and impact velocity slightly above 100 m/s, the outer containment building can prevent local failure modes. At impact velocity higher than 120 m/s, scabbing and perforations are dominant. This concludes that in design and assessment of NPP structures against aircraft loadings, sufficient thickness or consideration of steel plates are essential to account for local failure modes and overall structural integrity. Furthermore, validation and application of detail 3D finite element and material models to full-scale impact analysis have been carried out to expand the existing database. In rigid wall impact analysis, the impact forces and impulses from FE analysis and Riera's method correspond well, which satisfies the recommendations of relevant standards and further ensure the accuracy of results in full-scale impact analysis. The methodology presented in this paper is extremely effective in simulating structural evaluation of full-scale aircraft impact on important facilities such as NPPs.

Herramienta basada en código abierto para el cálculo de blindaje en las instalaciones de Medicina Nuclear / Open Source Based Tool for Shielding Calculation in Nuclear Medicine Installations

Uno de los requerimientos indispensables en el diseño de las instalaciones donde se trabaja con radiación ionizante es la determinación del espesor adecuado de las paredes, pisos, techo y puertas de los locales, que garanticen dosis por debajo de las restricciones establecidas por la autoridad regulatoria. El objetivo del presente trabajo es desarrollar una herramienta interactiva, libre y de código abierto para calcular los blindajes requeridos en una instalación de Medicina Nuclear. En el código, desarrollado en Phyton utilizando el entorno interactivo Jupiter Notebook, se incluyó el análisis tanto para Tomografía por Emisión de Fotón Único como para Tomografía por Emisión de Positrones. La herramienta fue implementada para el cálculo de los blindajes de un departamento de Medicina Nuclear del Centro Internacional de Restauración Neurológica (CIREN). Esta herramienta libre y de código abierto facilita los cálculos de blindaje aumentando la velocidad, lo que contribuye a lograr una optimización de la protección radiológica, pero también puede usarse como herramienta pedagógica(AU)

One of the indispensable requirements in the design of the facilities where ionizing radiation is used is the determination of the adequate thickness of the walls, floors, ceiling and doors of the premises, which guarantee doses below the restrictions established by the regulatory authority. The goal of this work is to develop an interactive, free and open source tool to calculate the shields required in a Nuclear Medicine installation. Analysis for both Single Photon Emission Tomography and Positron Emission Tomography was included in the code, developed in Phyton using the interactive Jupiter Notebook environment. The tool was implemented to calculate the shields of a Nuclear Medicine department of the International Center for Neurological Restoration (CIREN). This free and open source tool facilitates shielding calculations by increasing speed, which contributes to the optimization of radiation protection, but can also be used as a pedagogical tool(AU)

Parapet Along the Roof: Injury Prevention in the Context of an Ancient, But Still Relevant, Commandment.

BACKGROUND: Falling from a height accounts for 14.1% of all hospital admissions for traumatic injury. In 5% of cases, the injury is severe or critical, and in 1.5%, it is fatal. The dangers of falling have been recognized since time immemorial. Indeed, the Bible instructs us to build a parapet around the roof of our home so that, "…you may not bring the guilt of bloodshed on your house if someone falls from it" (Deuteronomy 22:8). This commandment highlights the relatively simple and practical means by which we can prevent falls. It is also one of a series of ethical laws that are presented to help us understand and obey the larger Biblical precepts of loving one's neighbor and guarding the sanctity of life. The concept teaches us that it is the responsibility of all individuals to be cognizant of others and to avoid harming people through negligence or carelessness. The aim of this article is to explain the commandment to build a parapet in the context of the risk of falling from a height and to expand on its wider implications. The present work was prompted in part by the alarming increase in fatal and near-fatal accidents in Israel in two particular populations.